Tach on DS instrument panel
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
The tach I got from Ron Wood Racing $225.00 (949)645-0393 It normally is supposed to mount to handle bar clamps,but I didn't like it up that high plus one roll-over and it would be history.Installing it in the dash was pretty easy just cut a hole that fit tight around the tach and put silicone on the backside to hold it in place.The dash needs to be raised up 1/2 inch so the tach can clear the headlight,so at the 2 screws at bottom of the dash I put 1/2 plastic spacers and longer screws.At the top you just slide up the dash and re-tighten the 1 screw. The wiring is set up to plug into the factory harness(no spicing)
tach pic
hope this helps
Jeff
tach pic
hope this helps
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Logan Collins
Classifieds, Garage Sale & Swap Shop
0
09-05-2015 08:03 PM
cody500ho
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
08-14-2015 05:03 PM
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)