Is there a quality aftermarket clutch disk manufacturer out there or will I have to go stock replacement. I have springs from ron wood, but it feels a little soft with nos. Any help would be appreciated
Scott

 

barnett may have something, but the outer friction plate may not fit perfectly without filing or using your OEM outer friction plate. Someone said white brothers has a clutch, but I'm not sure.

I have a special 9/9 carbon fiber/kevlar barnett clutch setup.

 

Thanks Scooby it has been a while, your bike has really evolved since the last time I was here (sounds #@@#ing mean). I looked at barnett first online and did not see anything for the DS 650 maybe I will call them. I can not believe the aftermarket is still so behind on the DS with every part available for the raptor. Oh well
Scott.

 

ANG~

Frictions: # K-1000K (8 req.)
Steels: # KP-2-20 (7 req.) and # KP-2-16 (1 req.)


Straight from Barnett. I ordered my from a local Barnett Dealer, it was around $130. ScoobyDFW is right, the outer friction plate does fit so you'll have to grid it down. I didn't use the stocker outer plate with the Barnett's due to the differences in the plates widthes. But if Scooby says it'll work, I would trust him, he knows his stuff!

 

thanks for the info, went to the barnett site found my local dealer and will call tuesday