Hey DSMike,

What cams are you running?

 

right now i have to A-2 RWR cams. do NOT try to do this if your not smart with motor or cam timing!

 

Heh! Don't worry, i'm not reving my baby that high! Just wondering what cams/cam timming(specs) pull that high up....

 

i use some weird cam timing, the A-2 cams are exhaust. so i have 2 exhaust cams in my bike right now. i broke my other cam and had this one so i did some welding on it.(LOL)

 

FYI on specs e-mailed from Gotfried:

1. sport cams - 266 degree - 10,00mm lift (.394")
2. "Pami EX" - 276 degree - 10,90mm lift (.429")
3. "599" IN - 284 degree - 11,00mm lift (.433")
4. "Pami IN" - 292 degree - 12,50mm lift (.492")
5. Stock cams -240 degree - 9,70mm lift (.382")

Specs stamped on my RWR cams (finally found them, under the sprockets!)
RW A1 - 284deg./.406" lift
RW A2 - 276deg./.433" lift

Web:
284deg./.395"
287deg./.425"
http://www.webcaminc.net/bombardier-atv.html

 

is there a high lift cam out there that won't require shim under bucket. currently i have the A1 rwr. really don't want to pull off my head because of fussy gasket on the pami motors, to go with shim unders.

 

i talked to elliotte yesterday i believe he said it is the #7 and it is a 450-290, said SHOULD clear with there stuff, dsmike probably has or has run them. anyways with there set-up they run shims on top

 

The only reason anyone is running shim under bucket is because of a post a long time ago form Marky Nark. Marky chewed up his motor when his regulars shim on top popped out and droped into his engine case and did some damage. That doesn't mean that it happens to everybody but it is always better to be safe than sorry.

 

Yes i argree people say springbind ????????? i run the pami race with no shim under buckets and i do belive the shim underbucket is a runaway myth!! go ahead guy's smack me if you will but i thjink there waste of time and money!! [img]i/expressions/face-icon-small-shocked.gif[/img]

 

i have the #7 cams in my yellow bike. i don't have shims under the buckets. haven't had any trouble with them.