I am getting the TM45 carb (next week)and I was wondering if there are any other things that need to be adjusted other than the throttle cable.

Thanks

 

Your existing throttle cable will work, but you will have to modify it a little bit. you can port your intake if you want,but its not a MUST.






Biggerisbetter.

 

I was wondering about jetting and the accelerator pump?
As for jetting I have:
W/B E-series
RWR CDI
K&N and usually under 1000 feet
15/40 with 22x11x9’s

What are the benefits of activating the accelerator pump [img]i/expressions/face-icon-small-confused.gif[/img]

 

the pump squirts fuel at low throttle, i have a 160 main with no bottom bog it is a lean bog. if your not getting a kit you will need a piece of radiator hose 2inch inner diameter it is a little on the steep side, like 10-12 a foot, that should get you going