So you just sit on the gas cap and go vroom vroom? I hear the thumpers are better for that purpose.. First time i met a guy i ride withs wife i said sompin like that cuz he put a new exhaust on her ATV. well that went over like a wet fart at a protology exam [img]i/expressions/face-icon-small-sad.gif[/img]

 

The Oster will make your teeth chatter! [img]i/expressions/face-icon-small-happy.gif[/img]

 

But sometimes this ONE is needed first.[img]i/expressions/face-icon-small-wink.gif[/img]

 

Why stop there i have a Vibratory Consolidating tool for pouring concrete walls in the shop. I aint conviced a girl to try it yet but that baby will make your teeth chatter standing on the forms.. Then there is the HOpak and thats an attachment ofr the big exavator [img]i/expressions/face-icon-small-smile.gif[/img]

 

LOL at J4K!!! you have a point for sure!

 

Where the hell is the fun in that? [img]i/expressions/face-icon-small-confused.gif[/img]

 

5.5HP of vibratory pleasure

 

Sounds like a good way to chip a gals teeth!![img]i/expressions/face-icon-small-happy.gif[/img]

I know...I just opened up Pandoras box with this comment! [img]i/expressions/face-icon-small-disgusted.gif[/img] [img]i/expressions/face-icon-small-happy.gif[/img]

 

Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency RubberHead vibrator head not only meets DOT non-metal head specifications for protecting coated rebar and expensive forms, but exhibit some very special and unique properties. The High Efficiency RubberHead urethane dimpled construction sends strong shock waves off the entire length of the head, with a larger radius of action, producing denser concrete with less voids to patch.
Why the Oztec RubberHead outperforms any other type of Vibrator.

(a.) When a smooth vibrator head (round, square or any other shape) is lowered into a relatively stiff concrete batch, the front or nose of the vibrator drills a hole. It pushes away concrete faster than it can return. Result, shock waves produced mostly from the vibrator's front end.

(b.) Oztec's patented RubberHead has a large number of openings which allow wet concrete to cool the inner shell. These openings act like suction cups, which keeps concrete in contact with the entire length of the vibrator head, sending strong shock waves into the mass.

 

I've seen Pandoras box. It's a bit overrated and in need of maintenance.[img]i/expressions/face-icon-small-happy.gif[/img]