Need help starting old 4 wheeler
#1
My uncle gave me his 1989 Yamaha breeze. Its been sitting for 15 years.. I got a new starter, starter clutch, battery, brake cables, ignition coil, rebuilt the carb, air filters, and it will turn over but not start. It sounds like it is misfiring. Im getting a good spark and spraying starter fluid directly through the carb and it still doesn't fire up. Dont really know what to do from here, any ideas? - Thanks
#2
Check the valve clearance then check compression. What I've been able to find is .002-.004 on the intake,.003-.005 on the exhaust valve. Don't know what average compression should be,but if it's less than a 100 psi this may be your problem. Sitting 15 years can cause a cylinder to have rust spots in it and it's sure not good on pistons and rings.
#4
Check the valve clearance then check compression. What I've been able to find is .002-.004 on the intake,.003-.005 on the exhaust valve. Don't know what average compression should be,but if it's less than a 100 psi this may be your problem. Sitting 15 years can cause a cylinder to have rust spots in it and it's sure not good on pistons and rings.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




