i am in the middle of taking apart my 400ex. i took out all the bolts out of the fenders.. and now im left with the lights attached to the frame from wires.. i need to take off the front fender how would i do this.. remove the lights ?? or remove the wires.. i dont know wut to do someone explain please.

 

This won't help one bit but I had the same problem a few months ago and didn't have the patience to worry about it.

 

The wiring plugs into plugs hooked to the frame. Unplug those and it is free. There is a little latch type thing on the green plug that will release the two parts.

 

ur going to have to explain wut u said tractor.. cus i went to go see wut u wher takin about .. my 400ex is 2003. maybe mine is different.. but u cant just unplug all the wires.. like i dont think so anywyas.. please try and explain wut u said more clearly.. im only 15 years old and anoobie at that[img]i/expressions/face-icon-small-tongue.gif[/img]

 

Hey Newborn like Tractor said...all you have to do is unplug the connector from the wiring harness attached to the frame(Green plug) and you will be able to pull the whole fender off with the headlight unit still attached to the fender! [img]i/expressions/face-icon-small-wink.gif[/img]

 

it's easier to do if you have a scribe or something small and sharp to push in the little tabs with.

good luck!

 

whats about the ignition.. does it come out seperatly ?? wut do i do with that.. does it come off with the green plug??

 

No... the ignition & neutral light indicator switch has it's own plugs. just unplug them the same way you did the headlight unit. The fender should come free now that everything is unplugged!
Good Luck! [img]i/expressions/face-icon-small-wink.gif[/img]