hey i was wondring what i could use to keep them from sliding off \

thanks

 

Usually the heaters come with self-stick surface to the handlebar, and normal grip glue will keep the grips on.

 

Well, if you have already installed them with something....you kinda screwed unless you can get it all cleaned off from the bars and inside the grips.
You needed to use a 2-part epoxy, you can get it at any auto parts store.

 

hi, i had a similar problem just put some electrical tape on the handle bar, and it should work. i did it to mine and it is perfect and not one problem with them.