When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok thank u for all the info so i should start it and keep turning that screw tithe right to get it to idle right. And i changed my carrier barring and now my back brake wont work. U know why
Let engine warm up good an yes turn the idle speed adjustment screw until you get the idle you looking for.If have to turn alot like 6 or 8 turn then something wrong like screw to short or you could have fuel and air mixture wrong or air leak
Yes brake fluid dot 3 or 4 be fine. hard to say were the fluid is going, do you see an leak or fluid on ground or pavement? leak at master cylinder or caliper?