What should I be looking for with tach and clutching

Reply Subscribe

Thread Tools

Search this Thread

May 23, 2003 | 10:25 PM

NYVForce

Thread Starter

Pro Rider

Joined: Apr 2003

Posts: 218

Likes: 0

What should I be looking for with tach and clutching

I installed a tach, and I have an EPI pro kit, HMF says peek torque is at 2000 rpm and peek HP is at 7800rpm. The EPI kit stalls till 2700 rpm, what should I be looking for.

May 23, 2003 | 11:26 PM

NYVForce

Thread Starter

Pro Rider

Joined: Apr 2003

Posts: 218

Likes: 0

What should I be looking for with tach and clutching

I'm looking at different springs what does engagment and shift out mean and what do they do.

May 24, 2003 | 03:49 AM

KFX400Rida

Range Rover

Joined: May 2003

Posts: 126

Likes: 0

What should I be looking for with tach and clutching

no clue on earth [img]i/expressions/face-icon-small-happy.gif[/img] Im a stock boy [img]i/expressions/face-icon-small-smile.gif[/img]

May 24, 2003 | 10:47 AM

cueball89

Pro Rider

Joined: Apr 2002

Posts: 327

Likes: 0

What should I be looking for with tach and clutching

Try contacting shot gun, he knows alot about the clucthes, i was going to clutch my 650 but never got around to it.

May 24, 2003 | 04:34 PM

NYVForce

Thread Starter

Pro Rider

Joined: Apr 2003

Posts: 218

Likes: 0

What should I be looking for with tach and clutching

I ran the V-Force just now and with the EPI kit it's at 6800 rpm at WOT, HMF said peak HP is made at 7800 rpm what needs to be changed the spring or the weights. Thanx