What's the purpose of shimming the needles? Is there no more grooves left in the needles to put the circlip?

 

there is no circlips on most kehin needles.

 

EasterEgg.... I'd be interested in seeing how you did the reserve tank myself!
Thanks!![img]i/expressions/face-icon-small-happy.gif[/img]

 

This may sound like a dumb question.... but where do you guys get the shims, jets, etc for the Prairie? Anyone have a parts list??

Thanks!!

 

here
find out what carb you have and this is a list

 

thanks easteregg


check your pm's

 

OK [img]i/expressions/face-icon-small-happy.gif[/img]

Thanks to all for helping!

It runs great now. I don't know what I did[img]i/expressions/face-icon-small-confused.gif[/img] must have been some dirt or an air leak. I took it all apart removed the bowls and slides, cleaned everything with carb cleaner, put it all back together, started and ran great none of the problems as before.

Once back together I made a 58 mph run down the street before needing to shut it down and it was still pulling.

Now all I need is the ups man to show up.

 

Easteregg,I'm also interested in the reserve tank setup you did.I have an 04 prairie 700.Please E-mail any info you have.Thanks.