Kawasaki Discussions about Kawasaki ATVs.

360 Update

Thread Tools
 
Search this Thread
 
  #11  
Old 06-13-2002 | 10:44 AM
PAPete's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jun 2002
Posts: 14
Likes: 0
Default

Sounds like plowing shouldn't be a problem with the Eiger, but here's a real dumb question... When you have the selector back in reverse, do you then have 5 reverse gears with the manual? Also, has anyone put a plow on a P360, and if so, how did it work?
 
  #12  
Old 06-14-2002 | 01:37 AM
jaybeecon55's Avatar
Pro Rider
Sound advice there. "Hey, watch this........"
Joined: Mar 2000
Posts: 2,000
Likes: 1
Default

Only one speed in reverse. Foot shift must be in neutral before you can move the H/L/R lever to the reverse position. Reverse engages only when foot shift is neutral. I think I remember from the manual that reverse is geared the same as 1st.

Jaybee
 
  #13  
Old 06-14-2002 | 02:42 PM
2fat4moto's Avatar
Pro Rider
Joined: Jun 2002
Posts: 348
Likes: 0
Default

PA Pete
I have a P650. My neighbor has a P360. I have ITP 589's. He has stock tires. His bike can go anywhere mine will. Mine is better in gumbo mud, but we go around it if we can. No need to wear it out on purpose. Plus, that stuff is hard to wash off. The 360 rides smoother, manuvers better, uses less gass, cost less money, & the belt is flawless. I had a little with mine on the 650, but o.k. now.
Don't know much about the eiger, but the 360 is awesome.
 
  #14  
Old 06-15-2002 | 10:34 PM
Terracer's Avatar
Weekend Warrior
Joined: Oct 2001
Posts: 18
Likes: 0
Default

We sell both machines (the Eiger and the Prairie 360) and I like the 360 better... Suzuki screwed the pooch when the Eigers came out with the massive recall campaigns.. Kawasaki managed to bring out a new machine (albeit with alot of carryover parts) with very few, if any, problems. We've sold maybe 25 of the 360s so far and we've only had ONE problem. Kawasakis automatic welder robots left some slag on the frame in the battery area and rubbed one wire of the wiring harness all the way through and it grounded out. That one problem on one machine of 25 AIN'T bad!

regards..

Terry
 
  #15  
Old 06-15-2002 | 10:59 PM
Jeffro31's Avatar
Pro Rider
Joined: Jan 2002
Posts: 251
Likes: 0
Default

tried my 4-wheel drive system again , got it in a spot where it would not move forward or backward in 2-wheel drive , flipped my switch and spun the back tires a few round and the front grabbed abd out it came. Spinning the front wheels should not make a difference because the power is coming from the diff to the tires , I have no idea why your has to spin the front wheels , that does not make any since. Good luck , you might want to get it checked out.
 
  #16  
Old 06-15-2002 | 11:05 PM
2fat4moto's Avatar
Pro Rider
Joined: Jun 2002
Posts: 348
Likes: 0
Default

Jeffro
Do you ride in jackson at pearl river?
 
  #17  
Old 06-16-2002 | 10:49 AM
Jeffro31's Avatar
Pro Rider
Joined: Jan 2002
Posts: 251
Likes: 0
Default

never been there , I live in Corinth , I go to west point, TN ,some and have rode in Holly Springs natinal forest and mostly around here. Is there some good ridind down there ?
 
  #18  
Old 06-16-2002 | 11:19 AM
2fat4moto's Avatar
Pro Rider
Joined: Jun 2002
Posts: 348
Likes: 0
Default

Jeffro31
We have the best trails I have ever rode on. They are perfect for ATV riding. People ride 24 hours a day down there. No charge. If you like to camp, you can do that too.
 
  #19  
Old 06-16-2002 | 01:18 PM
jaybeecon55's Avatar
Pro Rider
Sound advice there. "Hey, watch this........"
Joined: Mar 2000
Posts: 2,000
Likes: 1
Default

Thanks Jeffro for clarifying that. We'll check it out and see what's going on. FTR, we never manually turned the fronts to engage 4wd, but the bike did just spin the rears and never went into 4wd.

Jaybee
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chewy78
Polaris
1
09-08-2015 11:37 AM
Axl_Z
Classifieds, Garage Sale & Swap Shop
0
08-21-2015 10:19 PM
Nondem
Where to Ride
0
07-23-2015 08:38 PM
ModdedX
Performance Mods and Project Quads
4
01-23-2001 10:56 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:51 PM.