Installing a DuraBlueEliminator 2+2 rear axle on 2002LakotaSport300 ?
#12
Well first i removed the tires/hubs cuase then i took of the rear brake system thus having only the axle hooked up to the chassis.My goal was to remove the axle(because it was bent)so i didnt care if i scratched or hit it hard while removing it.I proceded with removing the 2 huge axle nuts in the brake hub side,then i hit the disc brake hub with a short 2x4 until it slided out .Then i removed the axle sliding it out through the left side (sprocket hub side)with the sprocket hub still on the axle.When i took it out the axle only had the sprocket hub on so then what you should do is only push it a little bit towards the inner side letting the piston ring show then hit it with a hammer and a flat screw driver until one side gives.Unless your not planning on taking the whole axle of i think your in for some real hassle.Hope this has helped you or any one ,Thanks.[img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)