Giovanni 110 wiring diagram
#31
Help! Would anyone know how the wires are hooked up on the back of the ignition switch on a 110 mini hummer 3 broke off and the red on is still there. the wiring diagram is not much help I need to know were the Green BL/W AND BL are soldered on to repair does anyone have a picture of the back of the switch
#32
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
Help! Would anyone know how the wires are hooked up on the back of the ignition switch on a 110 mini hummer 3 broke off and the red on is still there. the wiring diagram is not much help I need to know were the Green BL/W AND BL are soldered on to repair does anyone have a picture of the back of the switch
1) Check the main fuse to be sure it is OK. Often this gets blown up when wires come off the ignition switch.
2) Turn on the ignition switch and apply the brakes.
3) Take the blue wire and probe the three broken off connections with the blue wire one at a time until the brake light comes on. That connection is where the blue wire goes.
4) The other two wires go to the other two connections (one wire on each). (It doesn't matter which wire goes to which connection for these two wires).
5) Remove the main fuse before soldering the wires to the ignition switch. Reinstall the fuse when done soldering. Or you can unplug the ignition switch from the wire harness (if you have easy access to that connector) while soldering.
#33
#34
hey guys, new to the site and hoping someone can give me a hand with some wiring issues. I posted to this thread cause it almost answers my problem.
I have two gio 110 mini quads and on both of them the ignition key just spins in the ignition and doesn't do anything. I've looked at the wiring diagram to see what wires the ignition connects together but can't figure out what it's showing for the ignition switch (I read electrical diagrams on a daily basis and have never seen the symbol they use for the ignition switch). Does anyone know which wires connect together, or can someone do me a favor and check with a meter.
If anyone knows how to read that switch on the diagram and can fill me in on what its showing please let me know.
thanks in advance
I have two gio 110 mini quads and on both of them the ignition key just spins in the ignition and doesn't do anything. I've looked at the wiring diagram to see what wires the ignition connects together but can't figure out what it's showing for the ignition switch (I read electrical diagrams on a daily basis and have never seen the symbol they use for the ignition switch). Does anyone know which wires connect together, or can someone do me a favor and check with a meter.
If anyone knows how to read that switch on the diagram and can fill me in on what its showing please let me know.
thanks in advance
#35
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
hey guys, new to the site and hoping someone can give me a hand with some wiring issues. I posted to this thread cause it almost answers my problem.
I have two gio 110 mini quads and on both of them the ignition key just spins in the ignition and doesn't do anything. I've looked at the wiring diagram to see what wires the ignition connects together but can't figure out what it's showing for the ignition switch (I read electrical diagrams on a daily basis and have never seen the symbol they use for the ignition switch). Does anyone know which wires connect together, or can someone do me a favor and check with a meter.
If anyone knows how to read that switch on the diagram and can fill me in on what its showing please let me know.
thanks in advance
I have two gio 110 mini quads and on both of them the ignition key just spins in the ignition and doesn't do anything. I've looked at the wiring diagram to see what wires the ignition connects together but can't figure out what it's showing for the ignition switch (I read electrical diagrams on a daily basis and have never seen the symbol they use for the ignition switch). Does anyone know which wires connect together, or can someone do me a favor and check with a meter.
If anyone knows how to read that switch on the diagram and can fill me in on what its showing please let me know.
thanks in advance
Your ignition switch should have 4 wires on it.
Red: Fused 12 volt power
Blk: Switched, fused 12 volt power
Grn: Ground
Blk/Wht: Kill Switch connection to CDI
The ignition switch is actually two switches ganged together on a common shaft:
When the Ignition Switch is off:
Switch 1: (Red and Black) are not connected
Switch 2: (Grn and Blk/Wht are shorted together
When the ignition switch is on:
Switch 1: (Red and Black) are shorted together
Switch 2: (Grn and Blk/Wht) are not connected.
#36
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)