twister hammerhead II paint problems
#11
twister hammerhead II paint problems
Have a look at the pictures on this ebay listing, if you look at the pictures, the second and third pictures in the right columns show a closeup of the right side of engine. The second picture down shows a reverse cable unlike I have seen before, just going directly in. The third picture down shows a noodle like is on my Twister, is the one that is straight in like the one on your cart?
interestingly, one of the other pictures shows a cvt cover that appears to say dazon?
here is the listing:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4505263282
interestingly, one of the other pictures shows a cvt cover that appears to say dazon?
here is the listing:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4505263282
#12
twister hammerhead II paint problems
The 2005 have fixed the cable and rev problem, but if you have a 2004 you will have to replace the cable. As to where the brake, is I'm not sure since the dealer was the one that looked it over. I would just order a new cbale and wait. You will know when it is time to replace, because you will be sitting and try to back-up and you will go no where.
#13
twister hammerhead II paint problems
Good eyes Kell. Who knows what you are actually getting because the other shots are the exact same engine as the KPX models come with (shots with the performance pipe and filter) I remember thinking that a few shots looked just like the Dazon but didn't notice the emblem. In fact, other auctions by that vender have the KPX decals on the frame.
-Steve
-Steve
#15
twister hammerhead II paint problems
http://www.teamdazon.com/raidermaxdouble.asp yer dazon, they look the same just with a few different mods, snorkel etc etc
#16
twister hammerhead II paint problems
so far. i have had a twister for less than 12 months, broken brake line, smashed reverse cog in gear box, snapped cable, torn engine mount, chipped paint, back firing, the exhurst manifold broke, and the front end setup was weak and we had to weld up a few different things to strengthen it up cause it just kept bendin. i am wondering is there any one else out there with so many problems?!!?!? oh yer and yesterday the gearbox i think, torque converter belt shredded.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)