Lt80 .. can you email me the directions on how to remove the 2 clutch rollers and any other mods you might have for a 95 LT80 please ?

Email to : RMartinez5@houston.rr.com

Roy

 

Here is a diagram for the Tranny. Tranny 1

Tranny 2

 

I have seen these before but I don't understand what to remove. Can you point out what two rollers can be removed?

 

In drawing tranny No. #1, It's item number #5. Stock there are (6) rollers. Remove 2. Make sure their opposite of each other IE: 12 & 6 O'clock..., 3 & 9 Etc.

Rude Dog

 

Oh I see now ... much better explanation... thanks for the tip. Do you know what is the exhaust mod tip? Remove some air restrictor from the exhaust ?

 

Between the exhaust port on the head and the muffler there is a restrictor plate. Also, you have have a carb restrictor. Brass dealio in the carb. I dont have much knowledge about it, maybe somebody will chime in on this.

 

Muffler Diagram

I think its Item # 17

 

The carb restrictor was factory installed and found under the carb top. Un-screw the carb top and see if you see a large round block piece. If there it's between the carb top and the carb slide. If not it has already been removed.

Rude Dog

 

Can you please email me to schneiderchad@hotmail.com