lt 80 clutch maintenance
Feb 1, 2007 | 11:48 AM
#4
Extreme Pro Rider
LT80 Expert
LT80 Expert
Joined: Mar 2001
Posts: 8,340
Likes: 33
lt 80 clutch maintenance
Before every race.
Front::Check the rollers for flat spots, clean, re-assemble.
Rear:: lightly sand the black off the rear clutch pads, make sure the bearings are OK and install.
Front::Check the rollers for flat spots, clean, re-assemble.
Rear:: lightly sand the black off the rear clutch pads, make sure the bearings are OK and install.
Feb 1, 2007 | 06:32 PM
#6
Extreme Pro Rider
LT80 Expert
LT80 Expert
Joined: Mar 2001
Posts: 8,340
Likes: 33
lt 80 clutch maintenance
On my machine, I would not use grease . Getting the variator on w/o disturbing the rollers is the thing. A dab of grease will hold the roller in. [img]i/expressions/face-icon-small-smile.gif[/img]
Feb 1, 2007 | 07:08 PM
#7
Trailblazer
Joined: May 2006
Posts: 28
Likes: 0
lt 80 clutch maintenance
We race ours, was always told in the past to keep them cleaned & greased. We expiramented once w/o grease -- runs so much better. Clean with good parts works best. Worn rollers & plates is a recipe for disaster.....
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)