I recently purchased a couple of Yamoto 110 ATV's for my kids.
These have a 3 speed trans (+ reverse) with an "automatic" clutch

One of them appears to have developed a bit of a shifting issue.

Sometimes is shifts just fine, and all gears (R-123) seem to operate fine.
Other times it is difficult to shift, particularly from 1'st or 2nd down to N or First.

I was wondering if there is any adjustment on the clutch on these things ?

Any suggestions appreciated.

Thanks

 

to adjust the clutch, on the right side of the engine you will notice a stud and a locknut, loosen the locknut, turn the stud counter clock wise until resitance is felt, then back off 1/8 turn, hold the stud with a screw driver and tighten the lock nut.
this is what the manual say. but my suggestion is try it and if its still real hard shifting try backing off another 1/8 turn. then if it not any easier try replacing the clutch.