Im still not getting spark or am i ? I got the new stator and
Test1=.376 kilo ohms i dont know y its reading in kilo i checked at cdi plug and stator plug same reading
Test2=123.7 to 150 ohms
Test3= 49 to 52 volts
Test4= .16 to .26 volts
Testa=.4 ohms
Test b = i see A lot of zeros then jump into .050 to .060 volts
And i also tested inside of plug wire to ground =.000 to .006 and then spikes to .060 to 070 volts am i getting spark here? I dont know wen i take plug out and put in plug wire i see no spark or feel no

 

Just for your info i have new cdi & stator& ignition coil & relay/ silinoid &kill switch what else could be wrong ??

 

And new spark plug

 

I now have spark i cannot thank u enough i really appreciate all your time and kmowledge helping me through this my daughter is so happy and says thanks mr lynn i still have and few things to fix like carberator it only starts if u spray carberator cleaner in it but i should be able to work through this my self thanks again lynn

 

You're welcome for the help.

I'm glad you have it starting now...

 

I been reading these last post and testing my CDI unit
test 1=average 184 ohms on the 200k scale
test 2=average 65.5 ohms on the 200k scale
I think this means my CDI is trashed?
Any thoughts