96 Banshee top end rebuild
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Guys, just bought a Banshee last week. It is a 96 with Toomey pipes and silencers, boost bottle, K&N filters and cool head. I took it out before i bought it and it ran great... I paid $2500 for it. I think i got a smokin deal. Well yesterday i made my first trip to the local Dunes with it. It ran great, until i made a pass up the local drag and it cut out about half-way up. Well I lost a air filter and sucked sand it. I think i need to rebuild my top end and possibly a new cylinder. I havent tore it apart to see.
My question is this...
I want to put a good piston kit in it, but i dont konw what kind. I think Weisco is okay... but want to see if i have another option.
Any ideas and where is a cheap place online to get them?
Mark
My question is this...
I want to put a good piston kit in it, but i dont konw what kind. I think Weisco is okay... but want to see if i have another option.
Any ideas and where is a cheap place online to get them?
Mark
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I just rebuilt a 97 with a wiseco kit, i think i paid about 160 for it from atv addiction. Check ebay, sometimes you cam find a good deal there, I saw another brand on there recently, but dont remember what brand. If you aren't aware yet, there is an upgrade to the stock airbox too fix the problem of losing the filter. Much better deal. Stock is notoriously dangerous for just that reason. Also check out vitos.
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I think i will go with a Weisco kit. I havent heard anything bad about them.
I dont know banshee's much... i really dont have an airbox. It is just pretty wide open. I can see the air filters and carbs from the left/right and back side... Is this stock or did the guy i buy it from rip the "air box" off? Got any ideas on keeping these air filters on. I am thinking about fabricating a dual bracket that will keep these on nice and tight...
Mark
I dont know banshee's much... i really dont have an airbox. It is just pretty wide open. I can see the air filters and carbs from the left/right and back side... Is this stock or did the guy i buy it from rip the "air box" off? Got any ideas on keeping these air filters on. I am thinking about fabricating a dual bracket that will keep these on nice and tight...
Mark
#4
#5
#6
#7
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
i would look into the vito's racing forged(i think they call them superstocks). i know on sled many people have had problems clearencing cylinders and having seizures using wiseco piston because they expand so quick. but anyways anything is better than stock. tear it does and see if the cylinder can just be honed if not you will probably have to re-nic or bore. also check for play in the rod and main bearings. good time to freshen up the bottom end while you are in to.
Trending Topics
#8
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
You could always send your motor off to CT racing and let Allen Knowles rebuild it............. He could tear it all the way down, inspect it, true and weld your crank, port it, advance your timing, etc.... for a sweet deal in comparison to Duncan, and LRD, etc....
If it was me, this is what I would do, (recently done it) BECAUSE, when one purchases a used bike you are not sure where it has been and what it has been through, so why not have it redone from the crank up!!? Kinda like a strange chick you pick up in the club, you do not know where she has been and what she has done and who she has done it with, so you gotta get her checked out... LMAO........ No seriously with the exception of the editorial humor, you should check out CT racing.com that way you will have a brand new engine sitting inside that shee!! That is just my $.02/worth................... Later
If it was me, this is what I would do, (recently done it) BECAUSE, when one purchases a used bike you are not sure where it has been and what it has been through, so why not have it redone from the crank up!!? Kinda like a strange chick you pick up in the club, you do not know where she has been and what she has done and who she has done it with, so you gotta get her checked out... LMAO........ No seriously with the exception of the editorial humor, you should check out CT racing.com that way you will have a brand new engine sitting inside that shee!! That is just my $.02/worth................... Later
#9
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Oh yeah, one more thing.... I have been told buy quite a few Pro National Caliber Engine Builders that Vitos are for Shade Tree Mechanics that do not know how to do a Port job.... Seriously, Send your motor to Knowles and he will put Pro-X Blaster Pistons in that bad boy!!
#10