just wondering how you remove the front plastic? I just hope that you dont have to mess with the handle bars...so how is the easy way of doing this with out damaging the plastic up front...thanks...so do you have to remove the handle bars...

 

You shouldn't have to take off the handlebars. Go to Polaris and click on the manuals and brochures. You can download a free parts manual that will give a breakdown of the whole bike. That will give you an idea of what has to be removed. On my Trail Boss there were two rivets that I had to drill out, replaced them with bolts. Other than that it's pretty simple.

 

I did the same thing as scootergptx did.

 

First take off the hood and unplug the headlight and remove all bolts for the front plastic. Once that ia done you have to lift the plastic some to get the shift *** out of the plastic, if you have a shifter that is. I was able to pull the plastic completely off by turning it sideways and there should be enough play to get past the handlebarts one side at a time.

 

yeap thats how i did it too ^^

 

thanks guys i got it done ready now to bring it to the dealer for the front gear case fix!...