Jet kit for 04.5 Sportsman?
#1
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I swear polaris Dealers and Mechanics HAVE to be the Joke of the industry, I mean what do you do, get a certificate out of a cracker Jack box and suddenly your allowed to sell Polaris quads and work on them?
if its STILL rich then any competent mechanic would realize its still needs to be leaned out..
By the way, what elevation are you at there?
Im at about 840' + or - depending on what Hill im on, and I ran with a 167.5 ( I mistakenly earlier in another thread said I had run with a 165).. which was STILL a very lil bit rich..
But at anyrate I have now went to a dynojet..
if its STILL rich then any competent mechanic would realize its still needs to be leaned out..
By the way, what elevation are you at there?
Im at about 840' + or - depending on what Hill im on, and I ran with a 167.5 ( I mistakenly earlier in another thread said I had run with a 165).. which was STILL a very lil bit rich..
But at anyrate I have now went to a dynojet..
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I run 150's in my Sportsman's. I have bought them over the internet before, but I would just go to the dealer and buy a couple of sizes down (it would be faster than the internet). They are only about 2 bucks each. Also, if he wants to lean things out, he can move the clip up a notch on the needle jet.
Thread
Thread Starter
Forum
Replies
Last Post
chingchangchong
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
08-07-2022 11:36 AM
slowgsxr97
Classifieds, Garage Sale & Swap Shop
1
09-08-2015 07:33 PM
cdstang
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
08-31-2015 07:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)