New belt ware questions.
#1
New belt ware questions.
I just installed a new belt on my 97 400L Sport. I scuffed the clutch disks, and lightly skuffed the sides of the belt. I took it out for a ride with the clutch cover off and came back to check out the belt. I noticed little fibers on the sides of the belt sticking out a little. I was wondering if this was normal for a brand new belt.
Thanks
Ryan
Thanks
Ryan
#3
New belt ware questions.
Good. I was really looking to hear that. Tomorrow I will check the defection, and put on the clutch cover.
BTW When installing the secondary clutch. Where their 2 washers behind the unit.(Not inside) Behind it with a spacer? On the outside where the bolt goes through. I have a fitted washer for the big hole in the clutch, and a small lock washer. I am 95% sure both the washers were on the back side to space out the clutch. ANy ideas?
BTW When installing the secondary clutch. Where their 2 washers behind the unit.(Not inside) Behind it with a spacer? On the outside where the bolt goes through. I have a fitted washer for the big hole in the clutch, and a small lock washer. I am 95% sure both the washers were on the back side to space out the clutch. ANy ideas?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)