trouble with polaris magnum
#11
trouble with polaris magnum
this drain plug you all are talking about. need some more information on it. exactly wheres it at and do you take it off to make sure it is not clogged. on the other hand i hope this problem i had is an isolated event. i would hate to think this is going to happen every time i take it out. i sure wouldnt want to be out with a bunch and be the only one draining their gas.
#12
trouble with polaris magnum
At the bottom of the carb you will see a hose going straight down. Right above where the hose comes off the bottom of the carb bowl, there will be a screw that is screwed in from the side. Loosen it a couple turns, and it will open a small valve at the bottom of the carb bowl and drain out the hose. Since water is heavier than gas, the water will drain out first, provided you let the machine sit for a while to give the water time to settle out. Most dirt will settle to the bottom as well. However, dirt sucked into a jet or small port (if there is any) will stay where it is lodged. Only tighten the screw snug, as it screws into fairly soft aluminum.
#14
#17
#18
#19
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)