Elkbow's Next Project
#1
Elkbow's Next Project
Elbow's Next Project. See the Links. Except that he'll find a way to make some innovative improvement to it and then it will be featured at the SEMA Show in Vegas or something. [img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img]
Maybe he'll add 4 smaller digital gauges that show how much air pressure is in each tire.
http://www.highlifter.com/ubbthreads...0&fpart=1&vc=1
http://community.webshots.com/album/92430887vpAEqs
Maybe he'll add 4 smaller digital gauges that show how much air pressure is in each tire.
http://www.highlifter.com/ubbthreads...0&fpart=1&vc=1
http://community.webshots.com/album/92430887vpAEqs
#2
#3
Elkbow's Next Project
I'd love to have a temp gauge because by the time the warning light comes on at 230 degrees you have to shut the quad off.
Highlifter sells theirs for $90, which I think is a lot. (probably because they printed their name on it).
I don't want to pay that much!!!!
I wish another ATV parts supplier would come up with a kit for half that price. They would sell a lot of them. Of course it would have to fit without interfering with the "Lock and Ride" windshield.
If there is a light that comes on for the sportsman at 230 degrees, then does that mean there is a sender somewhere already? We should just tap into that and split the signal and send it to a gauge.
Highlifter sells theirs for $90, which I think is a lot. (probably because they printed their name on it).
I don't want to pay that much!!!!
I wish another ATV parts supplier would come up with a kit for half that price. They would sell a lot of them. Of course it would have to fit without interfering with the "Lock and Ride" windshield.
If there is a light that comes on for the sportsman at 230 degrees, then does that mean there is a sender somewhere already? We should just tap into that and split the signal and send it to a gauge.
#5
Elkbow's Next Project
I just looked at my service manual. There is something called a thermistor installed in the cylinder head. It has 2 wires coming from it. That's where we would tap. The question is that if we tap into those wires and send it to a temp gauge will it work. It may not be the correct kind of sending unit though. How can we know for sure?
#7
Trending Topics
#10