Rich at idle
#14
Rich at idle
try an auto parts store for a carb screw driver. its got a long handle with a **** at the end to turn it, with a 90 degree turn up at the driver end. thats what we use in the shop to adj carbs. this way you can adjust and watch your tach to get the idle mix adjustment right. dont forget tho that this is only idle mix. if the jetting is still rich you may have some bog just off idle becasue the pilot is still affecting the mix until about 1/8 or so throttle, then the needle and needle jet takes over.
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)