Any tips for ATV pulls?
#1
Any tips for ATV pulls?
I am going to enter my Xpress 400 in the 2 wheel drive 0-450cc class, what kind of chance do you guys think I might have. Has anyone hear pulled before? Any special tips? One of the rules is no weight can be added to the ATV. Looks like alot of fun, I guess I will find out how the Polaris 2 stroke power stacks up against the competition.
#2
Any tips for ATV pulls?
Add led shot/sand or something to the tool box!!! Ha Ha Ha. Seriously, you should do good. most of it is in the set up, Hardpacked clay track you need less tread and set your tires hard-10 psi or even higher! loose gravel or sand track, set your tires low, like even down to 1psi. Use Low range if you have it. Check or replace your belt, clutch kit helps. Adjust your rear spring as high as it will go. Are you a big guy??? If it is a loose track, get someone big to ride it!!! Push as hard as you can on the throttle!!!!!!!!!
#3
Any tips for ATV pulls?
DANO38, I see someone on a trail boss 330 at the atv pull in your pics and it has a new clutch spring in it so does the new spring help because i have a 2005 Trail boss and it pulls the front wheels off the ground off the line everytime i race someone but its stock so would a clutch kit help the torque a little or not. I would appriciate if you help me, Thanks.
BTW, Farmking i think your bike would do good in a pull so Good Luck!!
Bob
BTW, Farmking i think your bike would do good in a pull so Good Luck!!
Bob
#5
Any tips for ATV pulls?
http://forums.atvconnection.com/mess...ighlight_key=y
http://forums.atvconnection.com/mess...hreadid=386984
Hope those help you out a bit.
I warn you though sled pulls are very adicting. I'm putting my machine back together right now to get it ready for some up coming pulls. With my tracks on it is one pulling machine.
http://forums.atvconnection.com/mess...hreadid=386984
Hope those help you out a bit.
I warn you though sled pulls are very adicting. I'm putting my machine back together right now to get it ready for some up coming pulls. With my tracks on it is one pulling machine.
#7
Trending Topics
#8
#9
#10