I have a EPI clutch,I don't like the high engagement speed. I want to get 800 clutch and put a heel clicker in it. any deals out their? thanks

 

If your clutch is the "big Foot" # WE435010 order the RED primary spring(dont have the # sorry) it will still grab hard but engages at about 15-1600 rpm instead of 2100 or so. Drivable/plowable and still dont slip in mud. just another option

 

send this guy an e-mail, he has the best prices and best advise: Cob HERE

(thought he might not want his e-mail broadcast)[img]i/expressions/face-icon-small-confused.gif[/img]

 

I also had an epi kit before switching to the Heel Clicker. The epi has a much higher engagement than the HC, but will give you 2-4 more mph on top speed. The Heelclicker has a much lower engagement, with no benefit in top speed. It pull harder low to mid, and the epi pulls harder mid to high. Also, I was running the epi red spring with the epi kit. Very high engagement. Actually their maroon spring is the best for a stock engagement, without loosing the benefit of the kit. The heelclicker alone will probably give you what you want. Paired with the 800 primary and you'll be outrunning your on headlights, but at a major cost. The HC kit will only set you back about $160 from Cob at www.atvquadsquad.com. however, the 800 primary will be a bit more. A good person the speak with is sportsman7003. He also has a 700 carb that has done these exact mods. Look him up in here or again www.atvquadsquad.com