Well, while changing my front brakes I noticed a HUGE movement in front struts. Now How do I get the toasted balljoints out? ) 04 700SP

 

take the strutt off and put in a vice. then remove the two allen head screws that hold the safty plate on, put a peice of 2 inch pipe over the joint, use a peice of small steel that the threads of the ball joint will fit through and put the nut back on, tighten the nut and the joint will pull out

 

Even easier. after removing the allens heat the aluminum housing slightly and you can pull the old one out with a set of pliers, only because it is a little warm, and slightly heat the housing and put the new one in. It will push in easily.