Polaris Discussions about Polaris ATVs.

one tire spins

Thread Tools
 
Search this Thread
 
  #1  
Old 10-06-2006, 01:32 AM
magnumLover's Avatar
Range Rover
Thread Starter
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

on my 2000 polaris magnum 325 i was out riding and something felt wierd so i stopped and found out one tire was spinning, the axle is spinning but not that part that attaches it to the tire, so i took the tire off and tightened the bolt that this is connecting to, it got a bit tighter but when i hold the fround break and spin the tire on gravel , still stopps spining.

its hard to explain because i dont kno what the parts are called exactly, so if u need to ask questions, that would be fine[img]i/expressions/face-icon-small-tongue.gif[/img]

Simonthis is wut its like
 
  #2  
Old 10-06-2006, 07:16 AM
MOUNTAINEERRIDER's Avatar
Pro Rider
Join Date: Oct 2002
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

[img]i/expressions/face-icon-small-smile.gif[/img]Magnum Lover..What you need is part# 5131649..rear hub...When you replace the hub be sure you put the washers back on properly..One is cone shaped to help keep tension on the hub...This is a very easy job to change..Torque to 100 ft. lbs..
 
  #3  
Old 10-06-2006, 11:13 AM
magnumLover's Avatar
Range Rover
Thread Starter
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

ok thanks alot, but i dont have a torque rench, should i just tighten it real tight? thanks u releave me alot.

Simon
 
  #4  
Old 10-06-2006, 12:18 PM
MOUNTAINEERRIDER's Avatar
Pro Rider
Join Date: Oct 2002
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

That should work just fine.Just tighten it as tight as you can get it and it will be ok..
 
  #5  
Old 10-06-2006, 07:04 PM
magnumLover's Avatar
Range Rover
Thread Starter
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

ok thanks for the help.
 
  #6  
Old 10-06-2006, 07:28 PM
magnumLover's Avatar
Range Rover
Thread Starter
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

ok wait!!!! I CANT GET THAT DARN HUB OFF! lol help !! thanks [img]i/expressions/face-icon-small-happy.gif[/img]

Simon
 
  #7  
Old 10-06-2006, 08:15 PM
MOUNTAINEERRIDER's Avatar
Pro Rider
Join Date: Oct 2002
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

Magnum Lover...Once you remove the axle nut the hub should slid off...It is either a 1 1/4 or 1 1/8 nut...That is all that holds the hub on...
 

Trending Topics

  #8  
Old 10-06-2006, 08:17 PM
magnumLover's Avatar
Range Rover
Thread Starter
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

im confused, is the axle nut on the verry end of the axle? ahhh
 
  #9  
Old 10-06-2006, 08:25 PM
magnumLover's Avatar
Range Rover
Thread Starter
Join Date: Feb 2006
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

mine sure doesnt slide off it comes out about quartor inch then it wont budge
 
  #10  
Old 10-06-2006, 11:58 PM
Speeddrive1's Avatar
Pro Rider
Join Date: Mar 2006
Posts: 401
Likes: 0
Received 0 Likes on 0 Posts
Default one tire spins

Might have to use a BFH on it.
 


Quick Reply: one tire spins



All times are GMT -5. The time now is 10:19 PM.