Anyone who's had the Hawkeye subframe job ...
#11
Anyone who's had the Haweye subframe job ...
I just had my rear A-Frame crack on both right and left wheels. It was the front lower mounts to the subframe that cracked. My Hawkeye has 700 miles and was out of warentee and I expected the worst but my dealer contacted Polaris and they will fix it on their dollar.
Anyway keep this going because I suspect others have the same issues.
Iggy in Arizona.
Anyway keep this going because I suspect others have the same issues.
Iggy in Arizona.
#12
Anyone who's had the Haweye subframe job ...
I have seen the light eeehhhh sorry =====>I ment both sub frame's, its easy to spot the difference
the standerd frame come's with front mounting bracket's out of one layer metal bended and welded
the reinforced version come's with front mounting brackets out of two layers of sheet metal bended and welded with some extra reinforcements welded in the mid lower part of the subframe
by hand you can hardly twist the new version with the old you could
[img]i/expressions/devil.gif[/img]
the standerd frame come's with front mounting bracket's out of one layer metal bended and welded
the reinforced version come's with front mounting brackets out of two layers of sheet metal bended and welded with some extra reinforcements welded in the mid lower part of the subframe
by hand you can hardly twist the new version with the old you could
[img]i/expressions/devil.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)