New optional Moose Plow mounting system
#11
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I have had a 60" moose county mounted the old way since 2003. I has been a great plow with no problems. I dont mind the old style of hookup, two pins underneath, as I am still young. But I can see how a drive in style would be alot easier when I get a little older.
One thing I did with my moose is:
1-remove the rubber flap sticking up
2-drill holes in 60" angle iron to math blade on one side
3-drill holes in angle iron to match rubber flap on otrher side
4-paint black
5 both rubbber flab back on angle iron 90 degrees down instead of up.
This directs snow back down instead of up over plow when clearing long 1/2 mile driveways at 15 mph.
It also alows for much more light out of the headlights.
I now your not suppose to drive that fast.
One thing I did with my moose is:
1-remove the rubber flap sticking up
2-drill holes in 60" angle iron to math blade on one side
3-drill holes in angle iron to match rubber flap on otrher side
4-paint black
5 both rubbber flab back on angle iron 90 degrees down instead of up.
This directs snow back down instead of up over plow when clearing long 1/2 mile driveways at 15 mph.
It also alows for much more light out of the headlights.
I now your not suppose to drive that fast.
Thread
Thread Starter
Forum
Replies
Last Post
TheATVSuperStore.com
TheATVSuperStore
0
09-09-2015 07:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)