how much oil
#1
#2
#5
how much oil
yea i am sorry i should have said that my fault it is 2 stroke.... and i drained the oil that i had added and it runs great i have been riding it most of the day... i read alot of fourms about the 2 strokes so i added a 50:1 oil mix in the gas tank and filled the oil box.. it smoked for a little while but then faded slow.... i also read that when you use a wiseco piston you should let it warm up about 5 min before riding... so with all the knowledge that i have learned with 2 stroke and i am still learning. i think all is well.. i am also starting a new fourm because i have just got a another 4 wheeler today.
#6
#7
Trending Topics
#8
how much oil
i didn't unhook the oil injection i was just reading that on the first start after a rebuild you should add a mix in the fuel tank so that the oil injection system could get primed up. as far as the counter bal.. it doesn't have one in the 300 and i also didn't see any place for a dipstick under the carb and i also didn't see one...
#9
how much oil
a note on this topic.. when i first torn the engine apart there was oil in the crank case is this normal after a while or did the guy that rebuilt this before me do that wrong.... the guy that tried to rebuild it before i did installed the rings incorrectly and it caused extreme damage to the piston and the sleeve.. i had to bore it 60 over..