I put a new carburetor rebuild kit on installed carb but now I can't seem to get the darn thing to stay running. I have played with it so much that I now can't remember were I started with on the adjustments. Now it won't start at all.

 

EVER TIME I TOUCH THE CARB I ADJUST THE THROTTLE. THE ADJUSTER IS ON THE CABLE COUPLE INCHES UP FROM THE THROTTLE. TOO LOOSE WONT RUN. 1/8" PLAY IN THE THUMB THROTTLE.

 

Thanks I will give it a try

 

Get a manual and start from there. Float adjustment, air screw settings, etc all matter
Jeff