yeah, I am going to get the polaris stuff soon as I can. Do you know if it is difficult to replace the plates and about how much they are? I do have a manual as well. Thanks

 

Cant remember how much plates are, go on bike bandit to get an idea, have to completely dissasemble hub, good time to check wheel bearings and hilliard clutch to be sure they are rolling freely, armature plate is at the back against the magnet.If you find a bad bearing take it to your local parts store, they are a Timken bearing.

 

<div class="FTQUOTE"><begin quote>Originally posted by: polarisbear500

yeah, I am going to get the polaris stuff soon as I can. Do you know if it is difficult to replace the plates and about how much they are? I do have a manual as well. Thanks</end quote></div>

Since you have a manual,EASY job! Plates are about 8-10 bucks a piece.
Make sure you torque front hub nut to 12 foot pounds,just follow manual! Good luck

 

my 05 700 does the same thing but always in 4wd even with the switch unplugged.Had front diff apart twice and everything looks OK.