Warn provantage plow system Installl PICTS
#1
Warn provantage plow system Installl PICTS
System installed pretty easily, hardest part was installing the mounting bracket on the ATV, that took about 1.5 hours. I also noticed that way the winch is mounted and the front brush guard that the cable rubs. So temporarily cut a piece of PVC pipe and laid it over the beam on brush guard where it rubs.
Once the snow starts flying I will prob just remove the front brush guard. The trip springs are heavy duty and should work good for pushing snow. For the dirt I tested it on I needed some extra anti-trip action to I added some tarp straps. I worked the blade pretty hard and it held up just fine. If I would tried this with a Polaris blade it would of been bent all to hell.
Once the snow starts flying I will prob just remove the front brush guard. The trip springs are heavy duty and should work good for pushing snow. For the dirt I tested it on I needed some extra anti-trip action to I added some tarp straps. I worked the blade pretty hard and it held up just fine. If I would tried this with a Polaris blade it would of been bent all to hell.
#2
nice pics. you had better hope those rubber tie-straps don't let go from the blade and come-up and wack you in the face! LOL!
I wonder why you can't adjust the tension on the springs? On my old Galcier2 I could. In fact I did after 1/2 the winter season when they started to stretch-out.
How easy/difficult is it to remove/mount the blade for when you want to go trail riding or whatever?
I wonder why you can't adjust the tension on the springs? On my old Galcier2 I could. In fact I did after 1/2 the winter season when they started to stretch-out.
How easy/difficult is it to remove/mount the blade for when you want to go trail riding or whatever?
#3
#4
Well I finished my install of the plow this morning. I can lift the bottom of the blade off the ground 26"!!!!......That is even higher than my old glacier 2 system. Now we just need snow so I can test it out.
Deputy swan-----Not sure if your is different or not. But where you have the winch hooked to on mine the cable just slides through(kind of a pulley system) and the hook hooks up to the plow mount more toward the machine.Mine is on a xp though so that could be the difference.
Deputy swan-----Not sure if your is different or not. But where you have the winch hooked to on mine the cable just slides through(kind of a pulley system) and the hook hooks up to the plow mount more toward the machine.Mine is on a xp though so that could be the difference.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
jrooker6
Polaris
18
04-23-2016 07:36 PM
ATVC Correspondent
Performance Mods and Project Quads
5
10-10-2015 10:20 AM
TheATVSuperStore.com
TheATVSuperStore
0
09-09-2015 07:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)