after market for sp 400 2008
#12
i also have a 2008 sp 400 ho,the problem on mine is that the rotor and brake pads are mounted on the front instead of the rear like all other polaris's i've seen and all other 4-wheelers for that matter,i don't know why yours isn't like mine,but there is no where to bolt them,there isn't any pre drilled holes to bolt them to the a arms,and even if there was they wouldn't fit because of the rotor and brake pad location,did your 2008 already have pre drilled holes to bolt them to,and is your rotors in the front or in the rear,every one that i have saw have been in the front.........
#13
#14
#15
#16
#17
i had a set of aftermarket stickstoppers off my sp 450 and just cut out knotches so they would clear when turning. don't like the cheap plastic ones but they are better then nothing.
#18
Are the Sportsman 400H.O not just a 300 Hawkeye chassis with a larger 455 motor and wheels?
They seem to have the same dimensions and suspension.
http://www.atvreviewnetwork.com/enth...e2=22639&go=Go
They seem to have the same dimensions and suspension.
http://www.atvreviewnetwork.com/enth...e2=22639&go=Go
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
General RUV / UTV Discussion
6
03-22-2016 09:55 AM
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
2008, 400, 400ho, 5436411070, 5436412070, aftermarket, boot, boxes, covers, cv, guard, guards, polairs, polaris, sportsman
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)