awesome. thank you much appreciated

 

my quad is train driven. will those hubs still be there that i have to drain?

 

i meant chain not train

 

IF you have AWD ,YES there will be hubs to drain. OPT

 

I am guessing his quad is a 2wd.

 

actually there is a button on the quad that wen pressed says AWD. not sure though what it is wen the button isn pressed.

 

Then you have the hub activated awd. Drain and fill plug located on hub,center of front wheel.drain,fill at 12 o'clock position,turn until drain /fill hole at 4 o'clock position,drain excess,reinstall plug. Use Polaris Demand Drive Plus hub fluid. OPT

 

ok so let me get this straight because i think im misunderstanding you. im supposed to put the hole in the twelve oclock position fill it then drain it after i fill it? doesn that defeat the purpose of filling it? or does it not stay in the hub once filled?

 

3/16" allen wrench to remove the plug,turn to 6 o'clock to drain old fluid, turn to 12 o'clock to fill (about a couple ounces or less) THEN turn to 4 o'clock to drain excess, after it quits dripping,then re install plug!!! This allows required level to remain in hub(a little extra won't hurt) OPT