2003 Polaris sportsman 700 ignition no start
#1
2003 Polaris sportsman 700 ignition no start
Polaris # EH0680LE011
2003 sportsman 700
I have no spark on either cylinder
I have read some of the posts about the Ducati ignition system and the change over kit 2202602 just wanted to make sure this was correct part number before I ordered it
Also is there anything to watch for when doing this kit I have flywheel puller and also a good commercial solder iron for stator connections.
2003 sportsman 700
I have no spark on either cylinder
I have read some of the posts about the Ducati ignition system and the change over kit 2202602 just wanted to make sure this was correct part number before I ordered it
Also is there anything to watch for when doing this kit I have flywheel puller and also a good commercial solder iron for stator connections.
#2
Correct part#. Shouldn't need the soldering iron as all stator wiring and jumper harnesses have connectors. Seems like the most common complaints were not grounding the stator brown(ground) wire securely plus the extra red wire needed to tie into the jumper harness is buried deep in the main harness and you have to dig for it. Here's the pdf basic kit parts list and instructions. http://www.google.com/url?sa=t&rct=j...,d.aWc&cad=rja
Thread
Thread Starter
Forum
Replies
Last Post
whitty
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
67
02-24-2021 02:52 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
05-27-2015 11:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)