Brake problems!!! Hanging up.
#11
The adjustment did not seem to work. It loosened up a little bit but still is hanging up. I installed the old pads and things are OK. I think the caliper needs to be rebuilt. I had this happen on a car years ago and a caliper rebuild fixed things.
I have the old calipers that have a black **** with a 7/16 jab nut on the outside of the caliper. I did replace the fronts which improved braking. I am going to have to run this set up for a little while until I can get a little x-tra $$.
I ride in a sandy river in knee deep water for the last four years so the fine grit sand and water probably has the caliper caked. Still, for a 7 year old machine, that is not bad.
I have the old calipers that have a black **** with a 7/16 jab nut on the outside of the caliper. I did replace the fronts which improved braking. I am going to have to run this set up for a little while until I can get a little x-tra $$.
I ride in a sandy river in knee deep water for the last four years so the fine grit sand and water probably has the caliper caked. Still, for a 7 year old machine, that is not bad.
Thread
Thread Starter
Forum
Replies
Last Post
toonces
Buying an ATV
17
10-16-2019 12:11 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)