Polaris Discussions about Polaris ATVs.

greasing help

Thread Tools
 
Search this Thread
 
Old May 13, 2002 | 07:54 PM
  #1  
groundhog's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2000
Posts: 25
Likes: 0
Default

[img]i/expressions/face-icon-small-disgusted.gif[/img]i just got done greasing on my 500 h.o. and found all the fittings except the ones on the upper or lower steering post bushings and the rear wheel hub bearing carrier.i've looked at the owners manual and can't see them where it says they are supposed to be.am i just overlookin or what.any help will be greatly appreciated!!!
 
Reply
Old May 13, 2002 | 08:22 PM
  #2  
500DUSE's Avatar
Pro Rider
Joined: Jan 2001
Posts: 712
Likes: 0
Default

The 00-01 has only 1 on the steering post
Ithink before that they had one lower?
Take off the rack and front panal,its just under where the top of the panal would be if it was on.You have to move the wires that run up the post.It's behind that.

The rear hub carrier=Remove rear wheeles(easier that way)look at the back(inside)top of the carrier is,right between the upper control arm bushing(thats what it grease's).

Got it?
 
Reply
Old May 13, 2002 | 11:26 PM
  #3  
groundhog's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2000
Posts: 25
Likes: 0
Default

[img]i/expressions/face-icon-small-happy.gif[/img] thanks alot 500duse.couldn't have figured it out with out you.
thanks again!!!!!!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigred20653
CAN-AM (BRP)
1
Sep 19, 2015 02:11 PM
bmark0610
General Chat
1
Sep 7, 2015 09:42 PM
rawbdiggity
Yamaha
4
Sep 7, 2015 12:05 PM
toonces
Buying an ATV
0
Aug 5, 2015 05:55 PM
toonces
Buying an ATV
2
Jul 28, 2015 01:58 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:27 PM.