250cc Baja wilderness trail no power to ignition
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Hello everyone, had a project dropped in my lap. Need some help please. As title states, I have no power to the ignition switch or the dash in general. Brand new battery, new ignition switch and no power to the front. Solenoid clicks when i put power to it and bike will turn over when i jump solenoid but I have no power. Any suggestions before I have to disassemble this thing and chase wires? Thank you in advance and have a blessed day
#2
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Ok so this one goes from battery to starter solenoid then wires and fuse that goes to ignition switch. Have power to solenoid but not the the wires going to ignition and fuse is good
![](https://cimg3.ibsrv.net/gimg/atvconnection.com-vbulletin/2000x1124/1724091251988389096786796557071_74548407b54fe71a2544c2939a0020453efe1dd8.jpg)
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Right, difficult to see colours on that pic, but the thicker wire in that multipin red plug will be the one going to the ignition, if there is no power on it there, the solenoid's fuse holder is broken. If there is power on it at the solenoid plug but not at the ign switch, the wire has a break in it.
#5
Thread
Thread Starter
Forum
Replies
Last Post
boola1341
1) Engine problems..
1
03-10-2010 11:19 PM
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)