LT80 starts but won't go
#12
LT80 starts but won't go
Got a compression tester and checked it. I'm getting over 120lbs, so I think that's good. I read somewhere else that a carbon build up on the exhaust ports could cause poor performance and that these small motors are prone to carbon build up. Anyone had this experience and what was the fix?
#15
LT80 starts but won't go
Success!!!!
I took the petcock out and cleaned it. found some crap in the tank and cleaned it as well. Still the same.
Then I cleaned the carb for the third time and there was some junk in the main jet. Cleaned it all out and the bike runs fine now!
Thanks to everyone that replied. Now I can sell the bike.
Ray
I took the petcock out and cleaned it. found some crap in the tank and cleaned it as well. Still the same.
Then I cleaned the carb for the third time and there was some junk in the main jet. Cleaned it all out and the bike runs fine now!
Thanks to everyone that replied. Now I can sell the bike.
Ray
#16
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)