livex

so your uncle bored out the carb? do you think if i could ups my carb out there he could bore mine out for $50 as well? and as for the pipe, let me get it straight, you cut the end that the end cap is on, then drlled some holes in and put the end cap back on? get back to me on it because i realy want this z250 to rip and come spring time i wil be ordering a big gun and will be pulling big wheelies and dont want the pipe to snap or anything like that...and if you have any other mods done i'd like to hear about them and if the power gains were noticeable, oh and also, did you notice any loss in the top end due to the carb being bored out?...seems like more mms would give more bottom and sacraficing top

 

Not my uncle just a family friend i can find otu what he can do for you. And yea thats all i did for the exhaust took the end cap out cut the pipe drilled the hoes and then put the end cap back on. Their was defintly alot more lower end and i did not notice any lose of top end.

 

Do you think you could find a spot for my carb; I would give 100$ to anyone who can do this.

 

me too...please ask around

 

hey dunbarr can you get some pics of your bike. I want to get some handebars btu i want to see how they look.

 

yeah dunbar, let's see some pics...i'm probly gonna get some bars for my birthday...but if i get good grades, i want to get elka recreational series front shocks

 

hey, I just updated my pics and they should be approved in no time. I relocated my ignition to the front of the handlebars on the lip... you should see it when they are up.

 

Thank. My Z has been garaged for about 4 months. So its time for me to take her out. And also i would like to modify her a bit more so i looking into some handbars.

 

Renthals are my far favorite, they are extremely light and if they bend wich they won't you can send them back to get free ones...But they are a little pricey for the highbend like myn.

 

not seeing pics...lol...do i have to wait for it to be put on or something?