85 to 88 Suzuki LT230S Quadsport help.
I did rejet after the K&N and the exhaust but i don't remember if i re jetted after the big bore kit. It will run fine at high speed when its cold, but after she starts to get hot, thats when she starts to break up on the top end. Trailrider, is your front end wider than stock, it it is what did you do to get it that way?
I did rejet after the K&N and the exhaust but i don't remember if i re jetted after the big bore kit. It will run fine at high speed when its cold, but after she starts to get hot, thats when she starts to break up on the top end. Trailrider, is your front end wider than stock, it it is what did you do to get it that way?
if you did a 260 bigbore, the stock 26mm is not enough carb for what you got. a 28mm flatslide would work out better but you still have to jet it right.
yes it should. bashr52 has a 28mm he might know better than i do. and i got my rims at rockymountainatv.com. the rim size is 10x6. it uses the stock tire size its just an inch wider. its the offset that gives the wider stance. its like getting a +2 extension on each side. i run the .160 wheels, i have flipped and rolled with those wheels and they haven't bent yet.
no longer necessary, i took the carb apart and cleaned it real good with some carb cleaner. put it back together, re-adjusted the screws to 2 turns and it runs like a top again.
Anybody know where to get a headlight bulb for these things that is LED? Im looking for some brighter light without actually replacing the whole unit for a complete LED light?
Anybody know where to get a headlight bulb for these things that is LED? Im looking for some brighter light without actually replacing the whole unit for a complete LED light?
welcome to the forum. i am one of the co-contributors for The Vault. And you use 250r a arms on your 230? i would like to see how you made that work, because only 250s a arms will work with minor mods. and the 2 inch axle extenders, not really a good idea. i use a 250r rear axle and douglas 9x9 rims to widen my rears out over 3 inches without the worry of bending my axle.
hey we fabbed up some mods for the 250s a arms didnt mean 250r mistyped by bad but they work nicely and recently took off the axle extenders i was given a 88 flat track racer with extended axles on it and i switched them out works much better thanks for the comment how can i get on the vault i have tried for months now with no avail????? do you know where i can get some OEM mudflaps?