ok thanks for the reply i rebult my card for now,had the kit on order when i first posted.took it for a ride and wow it is a fast little machine. was looking for a chain tensor to check the chain and i have no ida were it has gone? does anyone has a close pic of theirs so i know what i am looking for? i have a platic roller that looks like is can't be moved, and a platic thingy hahhaha that is kinda flat an the bottom and then i got a bolt thats supposed to have something on it but nothing is their.looked at bikebandits website for a part lookup but saw nothing on it . thanks bigmac and ugly 88

 

schirtzy
Are you looking for a chain tensor tool to check chain tension , or a chain roller to keep the chain tension in check?
I dont know of a tool for checking chain tension. Unless you count a ruler. The proper chain play is 1.5 inch's. Check it at the center of the chain once the adjustments have been made and the quad is back on the ground. Check it, or have someone else check it, while your setting on the machine.
The upper "bolt" supposed to be a roller. You can use a rollerskate wheel in a pinch. But only till you can get the correct part.
It helps keep the chain under control when the suspension is at full compression. This needs to be in place before you do any serious riding. The chain could jump off in a hard landing. Thats never a good thing.
Ebay has some good aftermarket chain rollers for sale.
The one im running came off a Banshee. So there should be an ample number of these out there.

 

thanks i dont have a top roller at all and that were my question came from thanks

 

i was looking i have the same problem running fine then just shuts down this week just got done redooing the top end piston rings valves clutch... running down the tralles and like someone turned my key just died no put put with downshifting nothing then pulled it home got little spark nothing to fire spark then nothing then spark again duno i hat wirring ..if you or anyone els found out what the problem was pleace help
email me at cronic989@yahoo.com plz...........................<u>email me at cronic989@yahoo.com plz...........................</u>

 

crionic989

It haddnt hit a lick since, has it?

 

I know we have touched on this in the last year. Somewhere. Oh well, I cant find it either.
The two calipers are identical. (Q.S. and Warrior)
I should say that this is not a mod but a source for a replacement part. There has got to be a Worry in your riding area. Do a stare and compare you will see for yourself.
While your there, the upper chain roller should look familiar as well.

 

What ya got?
Hook a brotha up!

 

has anybody ordered the a-arm bushings set from
Vinces cycles?
mine are pretty shagged out. prolly looking at replacing the ball-joints too. ouch$

 

Everybody, be shure to take a look at the pics for this quad, please. This has got to be THE nicest 230 out here. Yeah, I know, there needs to be more pics, but what can you do[img]i/expressions/face-icon-small-smile.gif[/img]?

Good to hear from you MalHombre.

 

I tried to order a set a few months ago and they weren't available. Had to go with factory stuff which wasn't very cheap. I got some new ball joints off ebay for $25 shipped each.