I haev tried to replace the starter on my lt80 and I am stuck do I have to pull the whole engine. I can't figure out how to get it out. If you know please help as I have already taken off the left side cover adn the bolts for the starter it is loose, but I can't get it out. Thanks

 

Welcome to the forums. [img]i/expressions/face-icon-small-smile.gif[/img]
They are hard.
Try removing the main bolt that holds the motor in and moving the motor slightly to get it out.

 

i replaced my sons twice. remove the battery lift the front end up 90 degrees remove the front motor bolt. this will allow enough clearance. its a pain but just becareful when you move the motor around its a little top heavy. good luck

 

Our 80 is at a small engine mechanic shop now. The mechanic is saing the starter can't be replaced without removing the engine. Is there any specific info you can give for replacing the starter?