I took my hubs off my z400 to have bearings put in, and when I put them back on I have about half a inch or more of just shaft there and I do not remember there being that much. The bearings before were flush with the hub ends and they are now, but i must be missing a spacer or something because before the end nut on the spindles were somewhat tight against the outer bearing on my spindles and now theres a lot of room.

Can someone post pics of what their front hub assembly looks like at a few different angles and a exploded diagram would be very nice.

Thanks, and happy riding!!!

 

try here parts

 

thank you soooo much!!!!!!

I am missing 13 and 12 on

http://216.37.204.206/xtremepo...sp?Type=13&A=161&B=21


the wheel front diagram

Ill have to stop on the way back from school and order them to get it back together.

 

those are the spacers for your seals. did you loose them or the people who installed the bearings

 

I had thrown them away because i thought they were the bearing innards that were shot

I ordered a new set and they should be here tuesday