LT80 - Help! I've had enough with it...
#1
LT80 - Help! I've had enough with it...
We have an LT80 that I recently rebuilt with help from a mechanic. Cleaned the carb, blocked off the oil injector pump, and running 32:1 pre-mix. I've adjusted the throttle needle to multiple positions and still have no luck.
It tries to start up quickly but then will stall right out. When I did have it running it would stall only at full throttle and at full throttle it would begin to backfire.
It does have a fuel shut off in the fuel line.
I am out of ideas at this point...
It tries to start up quickly but then will stall right out. When I did have it running it would stall only at full throttle and at full throttle it would begin to backfire.
It does have a fuel shut off in the fuel line.
I am out of ideas at this point...
#3
This weekend it would run, but stall and sometimes backfire at full throttle. However, Monday when my son tried to start it and keep it running it would start right up then stall out.
It was a Pro-X top end rebuild.
To back up and provide a full history...we've owned this for about a year. I did not know about the oil injection so that tank was run dry and what ruined the previous piston, hence the required re-build. This is also why I decided to go with a pre-mix from here forward.
It was a Pro-X top end rebuild.
To back up and provide a full history...we've owned this for about a year. I did not know about the oil injection so that tank was run dry and what ruined the previous piston, hence the required re-build. This is also why I decided to go with a pre-mix from here forward.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)