Big Tex Trailers
#11
Big Tex Trailers
Bought a Big Tex 5x7 four years ago and in the first two years both steel fenders had fallen off. Use it for tough work over rough terrain however. Recently bought a 5x8 trailer from Northern Tool and decided to rip off the low quality lights and put in 6 LED's. Put the rear ones in tall boxes mounted up high and put the side markers into frames to keep from getting damaged off road. $200 into the lights and boxes and well worth it. Replaced lights on the Big Tex 5 times in 4 years. The trailer was used by one of my workers and guessing he jack knifed it on a building as the tongue is crooked and one of the wheel housings is bent. Don't want to deal with it so giving it to a friend to have for free.
Bought a 04 H&H 20 ft tilt bed trailer a couple years ago and it's a pretty nice trailer, lousy paint but fast trailer. IMO a better trailer is PJ. Same year bought a 14ft dump trailer 15K gross and it's quite the trailer! Paid $6,000 for it brand new and now similar ones are selling for around $8,000, bought prior to the steel hike.
Bought a 04 H&H 20 ft tilt bed trailer a couple years ago and it's a pretty nice trailer, lousy paint but fast trailer. IMO a better trailer is PJ. Same year bought a 14ft dump trailer 15K gross and it's quite the trailer! Paid $6,000 for it brand new and now similar ones are selling for around $8,000, bought prior to the steel hike.
#13
Big Tex Trailers
Originally posted by: Webone
My Bigtex trailer is actually 6 x 12 >> You can check it out on the Bigtex website http://www.bigtextrailers.com/spec/35sa.html
It is a 35SA and does not have a gate on the back...
It has never let me down and has been Great !!
My Bigtex trailer is actually 6 x 12 >> You can check it out on the Bigtex website http://www.bigtextrailers.com/spec/35sa.html
It is a 35SA and does not have a gate on the back...
It has never let me down and has been Great !!
Thread
Thread Starter
Forum
Replies
Last Post
badgerboy1
Trailers, Toy Haulers, Motorhomes.
5
09-26-2017 06:11 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)